The significance of making pellet with sawdust pellet machine

In the operation of sawdust pellet machine, some customers complained that the sawdust pellet machine can only the powders rather than pellets. Then, what is the reason for this phenomenon and how to solve it? We would explain it in the following content.



The first reason is the serious wear of the die in sawdust pellet machine and the meshes are smoothed by grinding, resulting in serious expansion. Then, the materials are pressed with less pressure than normal, seriously affecting the forming rate of pellets that too much powder would be produced in the production of biomass pellet machine. In this case, the die of the pellet machine should be replaced.
The second reason is that the moisture content of raw material is too low or too high. If the moisture content is too high, there would not be too much powder, but the hardness of pellet would be lower than normal and very easy to loose. If the moisture content of raw materials is lower, it will be difficult for extrusion so that there would be too much powder. Then, the moisture content of raw materials should be controlled properly.
The third reason is the aging of sawdust pellet machine, which is lack of power. As a result, the motor is unable to provide normal speed that there is not enough pressure for pellet forming. Then, you should change the motor.

Then, what is the significance of making pellet with sawdust pellet machine?
1, Increase the feed reward: in the process of sawdust pellet machine production, due to the combined action of moisture, temperature and pressure, starch pasting and enhance of feed enzymes activity improve the digestion and absorption capacity of feed. Besides, the harmful bacteria and eggs in the feed can be killed through high temperature and high pressure steam conditioning that reduces the chance of animal disease, also improve the quality of the meat.
2, Avoid picky eating of animal: general animals are picky in eating, after granulating all the nutrients in the raw material can be put evenly and fully squeezed together in the feed pellet of lump or cylindrical, thus avoiding the nutritional imbalance caused by fussy eater and residual damage of some materials.
3, More economic and convenient transportation: the bulk density of feed increases about 40% through granulating, which can reduce the storage space with good liquidity, manageable. There would be no paste sticking phenomenon, convenient for transport distribution, also avoid the feed grading and dust pollution to the environment.
-----------------------------------------------------------------------------------------------------------------------------------------------------