The material and daily maintenance of die in biomass pellet machine

It is well known that the die is one of the important parts in biomass pellet machine. Due to the harsh working conditions of die, especially when processing materials with large hardness and friction coefficient, the requirement on the strong toughness and wear resistance of the material of die is higher. In general, the die in biomass pellet machine is mainly made of three kinds of material: high manganese steel, carbon steel, high chromium alloy materials.


 
High manganese steel has 100 years of history with good toughness and work hardening under strong impact; carbon steel is the most common steel with simple manufacturing process and the lowest price, but its wear-resisting degree is insufficient. It can be used to press feed pellet, however, when pressing fuel pellet with higher lignin content, its service life is short and can not meet the requirements. High chromium alloy steel materials have high toughness and good wear resistance. They can meet the requirements of most of raw materials in practice, but the process is complex and the price is the highest. Biomass pellet machine produced by KMEC adopts appropriate reinforcement steel die according to the raw materials of customer with high abrasion resistance, long service life and can fully meet the production requirements.
 
The die in biomass pellet machine is one of the important parts so that certain maintenance measures should be taken can help the biomass pellet machine work better. Below is the maintenance of die in biomass pellet machine.
 
The roller bearing of the die must be clean with gasoline or diesel and inject the lubricating grease under normal production conditions within 30 days. During the operation of biomass pellet machine, the operator must ensure that there is no rock or iron in raw materials so as not to damage the die of biomass pellet machine. The biomass pellet machine should be preheated when working in winter, because the weather is cold and the stability is lower, so the preheating time should be longer. Materials can be fed after the temperature of die rising. It has something to do with increase of production and wear reduction of biomass pellet machine.
 
As the professional biomass pellet machine manufacturer, we remind users that never ignore the important role of the die. The maintenance of various accessories in biomass pellet machine is also the maintenance for biomass pellet machine!
--------------------------------------------------------------------------------------------------------------------------------------------------------