Small Pellet Machine

Small pellet machine or small wood pellet press is designed for the family or farm need with lower output. It is mainly used to compress crushed corn straw, sawdust, plant waste, bamboo powder, grass, sunflower stalk, straw, rice husk, forestry waste, wood chips, and chemical waste into wood pellet or animal food. Raw material moisture is 10%~15% before enter into pellet machine.

Features of small pellet machine
1. Wide suitability of materials, like sawdust, leaf, straw and other biomass materials.
2. Stable performance, high output and low power consumption. Simple maintaining, low failure rate, easy operation.
3. The machine is casting as an integer with firm structure and long life span, motor-driven pellet mill or diesel engine-driven pellet machine are available for choosing according to the clients requirements.
4. High temperature heat treatment of flat die and compressing rollers, lower cost of high resistance spare parts.
5. High ratio of molding and high density of pellets.
6. Diameter of pellet are ranged fromΦ6—Φ12, according to customers requirements.

Attentions of operation
1. The operators should read the instructions carefully and have good understanding of the character of the homemade wood pellet machine, structure and application method. Stall and debug, use and maintain the pellet machine according to regulations.
2. Before connect the power supply, examine the ground cable is fine or not at first. Connect to the power of the machine and start the pellet machine are serious prohibited before connected the ground cable.
3. Don’t inspect or replace the spare parts with the live cables, or the operators can get a shock or injured.
4. Be sure to stop the pellet machine when the service man maintain the pellet machine, and cut off all the electricity supply and hang on the warning sign, to prevent human error accident from unexpected operation of machine.
5. Special lubricant should be added into the bearing of compression rollers of the pellet machine after every 12 hours of the operation of the pellet machine. 6. Please do cut off the electricity when rotating the compression rollers by hand. Please do not touch the rotating compression rollers and flat die by hand or other objects.
7. The clearance between the compression rollers and the flat die should below 10.mm, too small the clearance give rise to over wear resistance between compression rollers and flat die, even the damage of the whole pellet machine.
8. When the temperature of the homemade pellet press is below 10℃, the lubricant of the pellet mill are easy to freeze. Please warm the sawdust pellet mill to 10℃ and start the machine.

KMEC is one of the leading suppliers of biomass pellet machine in china. Making animal feed or wood pellet home used small pellet machine is one of our main products. We have more than 10 years exporting experience about the biomass machinery. And chose us, you will get a trustworthy partner. The quality of our products and service are A-class.