How to prevent the failure of pellet machine?

We found that the failure of pellet machine in the production not only affects its production efficiency, but also causes excessive production cost. In fact, these failures can be prevented in advance. Then, how to prevent the failure of pellet machine in advance?



1. Check the machine parts regularly to see if the work is normal. Mainly check whether the moving parts such as bolts on the worm wheel lubrication block and bearings can rotate flexibly and the wear.
2. The pellet machine shall be used in the dry room, and it shall not be used in places with acid and other corrosive gases in the atmosphere.
3. When the pellet machine has been used or stopped, the rotary drum shall be taken out for cleaning and brushing the remaining powder in the hopper, and then installed so as to make preparations for the next use.
4. If the stopping time is too long, the pellet machine must be wiped and cleaned, and the smooth surface of the machine part shall be covered with anti-rust oil and covered with cloth.
5. When the roller moves back and forth in work, the screws on the fore bearing shall be adjusted to the appropriate position. If the gear shaft moves, adjust the screw on the back of the bearing bracket to the appropriate position, adjust the clearance so that the bearing makes no sound, and turn the belt pulley with proper tightness. If it is too tight or loose, it may damage the pellet machine.

As long as the above work is done, the failure of pellet machine can be greatly reduced, and the production efficiency of biomass pellet plant can reach the highest level. As a professional pellet machine manufacturer in China, we provide all types of pellet machine for users all over the world. If you are interested in our pellet machine, contact us now to get more information about it.
---------------------------------------------------------------------------------------------------------------------------------------------------------