What materials can be used in the biomass pellet mill?
Shavings and sawdust, chips are the most common raw materials feed into pellet mill for a wood pellet plant to make pellet production.
However, Many other biomass materials can also be compressed into pellets such as miscanthus, alfalfa, straw, peanut shell, bagasse, bamboo,reed, hemp, switchgrass and other straws and grasses.
Before pellet compression in the biomass pellet mill taking place, wood, straw, grass and other biomass materials must be reduced in size, for the reason that only a raw material of consistent quality can produce consistent quality pellets. Too small or too large materials can severely affect pellet quality and increase energy consumption. The crushing of raw material is an important procedure when processing pellets with biomass pellet mill. The main purpose of crushing is to increase the exposure surface area of raw materials thus improving the combustion efficiency, the mixing performance of materials and the efficiency of granulation.
Moisture content of raw materials is also important in the whole process of pellet production. Higher moisture content of raw materials may result in higher moisture content in the final pellet moisture content. When the moisture content of the pellets extruded out of biomass pellet mill is higher than 15%, it will influence the pellet quality badly. Because the high moisture may rotten the pellets because of the decomposition of the batteries and fungus. When the moisture content of final pellets is lower than 5%, the pellet may easy be broken during friction caused in transportation and storage.
Energy crisis, global warming, and climatic changes call for technological and commercial advances in manufacturing high-quality fuels. Biomass is seen as a very promising option for fulfilling the environmental goals defined by the European Commission as well as various national governments. You may have a more unique material which you wish to compress into pellet form. Our small scale pellet plants are highly flexible and can be quickly modified to change the parameters to pellet different materials.
----------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------
Electric Wood Flat Die Pellet Mill is an ideal pelletizing machine mainly used for small-scale wood pellets production for home heating. The key parts of small pellet mill is flat die, pellet roller, power source and gear bearings.
News
- Small Pellet Machine Manufacturer-Kingman
- Application of Wood Pellets and Use of Biomass Pellets
- From Fossil Fuel into Biomass Pellet Fuel
- Biomass Pellet Making Machines Market
- Applying of pellet stoves for home use
- Highland pellets to build $130 million facility in arkansas
- How to deal with the blocked hammer mill
- How to Make Wood Pellets with Sawdust
- The government policy promotes the development of biomass fuel
- Market analysis of biomass pellet fuel
- Strategic positioning of renewable energy
- Biomass energy has pass through the pre assessment
- The key point of deep processing of biomass pellet
- Harbin is promoting the development of biomass machinery
- The development of biomass formation technology I
- The development of biomass formation technology II
- Biomass energy industry is now going full tilt in 2015
- Rapid increasing demand of sawdust pellet on the market
- Pellet fuel market in EU
- Chinese Biomass Energy Conference held in Beijing
- Future market development of straw pellet mill
- Peanut Shell Pellet Mill Makes High Quality Pellets
- The utilization of straw is only 5%, biomass energy needs our attention!
- Corn straw pellet machine relieves the tight supply of fuel energy
- Reasons for loose or not forming of biomass pellet mill